Find 2 Inch DN50 220V 24V, FKM Brass Body NBR Vition, 2/2way Normally Closed/opened on Industry Directory, Reliable Manufacturer/Supplier/Factory from China.

Inquiry Basket (0)
Home > Products > Brass Shower Head > UW-50 2W500-50 water solenoid valve

UW-50 2W500-50 water solenoid valve

  • UW-50 2W500-50 water solenoid valve
  • UW-50 2W500-50 water solenoid valve
  • UW-50 2W500-50 water solenoid valve
  • UW-50 2W500-50 water solenoid valve

UW-50 2W500-50 water solenoid valve

    Payment Type: L/C,T/T,Paypal,Money Gram,Western Union
    Terms of Trade: FOB,CIF,EXW
    Min. Order: 1 Piece/Pieces
    Delivery Time: 4-8 day Days
    Packaging: Box, Carton, Pallet
    Productivity: 20000 sets per week
    Brand: Brando
    Transportation: Ocean,Land,Air
    Place of Origin: Zhejiang
    Supply Ability: 150000 pieces per month
    Certificate: CE
    Port: Ningbo,Shanghai,Guangzhou

Basic Info

Model No.: 2W500-50

Product Description

AC 220V DC 24VG 2'' Inch DN50 2/2 Way Direct Operated UW-50 2W500-50 Brass Solenoid Water Valve


Description:

2 Inch Water DC24V Solenoid Valve. It's two way two position direct acting diaphragm electric solenoid valve with available voltage AC220V, AV110V, DC24V and DC12V. It can be used for liquid , air, water, gas in a variety of different applications. This valve uses NBR or Viton seal material that is compatible with many liquid such as water up to 80°C. The valve is normally closed, closed when de-energized and open when energized. It is capable of operating at zero differential pressure. This compact solenoid features with female BSP thread or NPT thread.
2 Inch Water DC24V Solenoid Valve has four coil with voltage AC220V, AV110V, DC24V and DC12V. The coil head is fitted with a DIN connection that can easily be connected with your own choice of terminals. This model is mountable in any position and features a conveniently positioned arrow on the body to indicate the direction of flow. Its response time is very low; in fact, it acts in less than one second, making it a great choice for all types of applications.
Non-applicable fluid
When the temperature is high, it is liquid, and solid when cooled; Corrsive Fluid; Fluid above 20 cst concentration.
Attention
The impurities in the line must be cleaned first before installation. In order to prolong service life, Y filter should be installed on the front end of solenoid valve.


Feature:

1.Pilot diaphragm drive, normally closed.

2.Valve body material is brass.
3.Can be operated directly without pressure.
4.Standard voltage : 24VDC,110VAC, 220VAC AC Voltage tolerance: ± 10% ,
DC Voltage tolerance:±1%.
5.Other special AC/DC can be made to client's order.
6.Thread: BSPT, NPT , BSP.
7.The standard product fluid temperature is 80°C(NBR).
8.Temperature:Viton(130°C), Silicon(130°C), PTFE(185°C).
9.DIN43650A connector Coil is interchangeable


Specification:
Model 2W160-10 2W160-15 2W200-20 2W250-25 2W350-35 2W400-40 2W500-50
Working Medium Air, Water, Oil, Gas
Motion Pattern Direct Drive Type
Type Normal Close Type
Aperture of Flow Rate mm 16 20 25 35 40 50
CV Value 4.8 7.6 12 24 29 48
Joint Pipe Bore 3/8" 1/2" 3/4" 1"11/4" 11/2" 2"
Operation Fluid Viscosity 20CSTBelow
Working pressure Air: 0~1.0Mpa Water: 0~0.7Mpa Oil: 0~0.7Mpa
Max. Pressure Resistance 1.0Mpa
Operating Temperature -5~80 degree
Voltage Range: 10%
Material of Body Brass
Material of Oil Seal NBR or VITON


Reference No UW-10 UW-15 UW-20 UW-25 UW-35 UW-40 UW-50
Ordering No 2W160-10 2W160-15 2W200-20 2W250-25 2W350-35 2W400-40 2W500-50
Pipe size(Inch) 3/8 1/2 3/4 1 1 1/4 1 1/2 2
CV 4.5 4.5 8.6 12 24 28 48
Orifice 15mm 15mm 20mm 25mm 35mm 40mm 50mm
Fluid temp(℃) -5~+80 -5~+80 -5~+80 -5~+80 -5~+80 -5~+80 -5~+80
Operating pressure kgf/cm2
(bar)
Water 0~5 0~5 0~5 0~5 0~5 0~5 0~5
Air 0~7 0~7 0~7 0~7 0~7 0~7 0~7
Oil 0~5 0~5 0~5 0~5 0~5 0~5 0~5
High Pressure type Water 0.5~10 0.5~10 0.5~10 0.5~10 0.5~10 0.5~10 0.5~10
Air 0.5~20 0.5~20 0.5~20 0.5~20 0.5~20 0.5~20 0.5~20


Dimension Diagram:

Water Valve Detail:

Tips: All accessories can be sold separately as repair parts (Diaphragm, Solenoid Coil, Armature Assembly)


Youtube video of water solenoid valve



Selection basis:


First,Select the diameter specification (ie DN) and interface mode of the solenoid valve according to the pipeline parameters.

1.Determine the diameter (DN) size according to the inner diameter of the pipeline or the flow requirement.

2.interface mode, general > DN50 to choose the flange interface, ≤ DN50 can be freely selected according to user needs.


Second,Select the material and temperature group of the solenoid valve according to the fluid parameters

1.corrosive fluid: should choose corrosion-resistant solenoid valve and all stainless steel; edible ultra-clean fluid: food grade stainless steel solenoid valve should be used.

2.high temperature fluid: to choose the use of high temperature resistant electrical materials and sealing materials made of solenoid valves, and to choose the type of piston structure.

3.the fluid state: large to have a gaseous state, liquid or mixed state, especially when the caliber is larger than DN25 when ordering must be distinguished.

4.fluid viscosity: usually below 20cSt can be arbitrarily selected, if the viscosity is high, you should use high viscosity solenoid valve.


Third,Select the principle and structure of the solenoid valve according to the pressure parameters

1.Nominal pressure: This parameter has the same meaning as other general-purpose valves and is determined according to the nominal pressure of the pipeline.

2.Working pressure: If the working pressure is low, the direct-acting or step-by-step direct-acting principle must be used; when the minimum working pressure difference is above 0.04Mpa, direct-acting, step-by-step direct-acting or pilot-operated can be used.


Fouth,Voltage selection: The voltage specification should be as convenient as possible for AC220V and DC24.


Fifth,Select auxiliary functions according to environmental requirements: explosion-proof, waterproof fog, water shower, diving.


Focus on your demands, Offer you best solution:


√ Contact us if some points you have doubt

√ Contact us if somewhere need to change
√ Contact us if not the one you are looking for

√ Contact us if you are doing designing


Welcome to your any question and inquiry!


NINGBO BRANDO HARDWARE CO.,LTD

 

*Brando is a professional manufacturer and designer of solenoid valve, solenoid coil and solenoid valve armature assembly, located in Ningbo, China. Our main products include armature assembly, solenoid coil, brass solenoid valve, stainless steel solenoid valve, plastic solenoid valve, pneumatic solenoid valve, pulse jet valve, diaphragm repair kit, pulse controller, injector rail and can serve customers from various industries. Our company has been producing for more than 10 years, and cooperates with different customers such as oil & gas, chemical industry, water treatment, food & beverage, medical system and so on.


*Brando maintains its high position in the industrial manufacturing. The advanced lathes and milling machinery are introduced, and from materials procurement to finished product and assembly, it is fully automated and controlled by computers, to improve product quality, and to continuously increase production and delivery efficiency.

*Brando has fully adopted the ISO-9001 quality management system and introduced the most advanced precision equipment for product inspection, such as digital pressure gauges, computer applications, air leak testers, pressure testers and flow testers.


banner 2


Main Services:
1. Customized Design and Production: Brando can design and manufacture customized solenoid valves, solenoid coils and solenoid valve armature components to meet your specific needs and applications. We can provide services from small air treatment devices to large fluid systems.

2. Quality Assurance: In addition to designing and manufacturing high-quality products, Brando also provides 100% testing services for all components to ensure that they achieve the best performance under the best performance and to ensure that it runs well in your project.

3. Delivery and After-sales Service: Brando provides large inventory and on-time delivery within 5 to 10 days. We also provide unparalleled after-sales service and 1 year warranty for all products.



Product range:

1. Solenoid Valve Coil
2. Solenoid Valve Armature Assembly
3. 5/2, 5/3, 3/2, 2/2 Way Pneumatic Valve
4. Refrigeration Solenoid Valve
5. Dust Collector Pulse Jet Valve
6. Diaphragm Repair Kit
7. Pulse Controller
8. Brass Solenoid Valve
9. Stainless Steel Solenoid Valve
10. Plastic Solenoid Valve
11. Injector Rail


Focus on your demands, Offer you best solution:


√ Contact us if some points you have doubt

√ Contact us if somewhere need to change

√ Contact us if not the one you are looking for

√ Contact us if you are doing designing


Company Info

  • Company Name: NINGBO BRANDO HARDWARE CO.,LTD
  • Representative: Lu Jin Jun
  • Product/Service: Solenoid Valve Armatures , Solenoid Valve Coils , Pneumatic Solenoid Valves , Pneumatic Cylinders , Pulse Jet Diaphragm Valves , Pneumatic Components
  • Capital (Million US $): 1000,000RMB
  • Year Established: 2008
  • Total Annual Sales Volume (Million US $): US$5 Million - US$10 Million
  • Export Percentage: 81% - 90%
  • Total Annual Purchase Volume (Million US $): US$1 Million - US$2.5 Million
  • No. of Production Lines: 10
  • No. of R&D Staff: 5 -10 People
  • No. of QC Staff: 11 -20 People
  • OEM Services Provided: yes
  • Factory Size (Sq.meters): 3,000-5,000 square meters
  • Factory Location: Ningbo
  • Contact Person: Mr. Brandon Bao
  • Tel: 86-0574-83879820
Email to this supplier
  • *Subject:
  • To:

  • *Messages:
    Your message must be between 20-8000 characters